Solar Shades

Solar Shades in Mooresville

Keep the water view, lose the glare

Call (317) 999-5154Get Free Quote
Quick Answer

A short orientation before the detail: this product gets measured in your home, built to those sizes, and installed once it arrives. The answers here cover selection, operation, care and what the warranty does and doesn't include.

  • Service: Solar Shades for Mooresville homeowners
  • Service area: Mooresville, IN and surrounding areas
    • For anything already installed, service visits are quick because we're working with parts. For new custom orders, expect a measure, then a few weeks of fabrication, then an install appointment we book once the product has been inspected.
  • Insured and bonded
  • Serving Mooresville, IN since 2008
Solar Shades Services

Expert Solar Shades for Mooresville Homes

Solar shades keep a view while cutting the glare off it, so they belong on the Mooresville houses that actually have one. The Echo Lake and Painted Hills lake communities are the clear case: a lakefront elevation has nothing to interrupt the sun and takes reflected glare up off the water on top of the direct light. Brookmoor is the other one, where parcels run from 8.4 to 134 acres and a house can sit with open exposure on every elevation and no neighbor to break it. Around Eagle Pines Golf Club the same problem turns up on a smaller scale, on ordinary lots with a long open sightline west.

Openness factor is a tradeoff, and anyone selling it as a feature is selling you something. A 10 percent mesh keeps a lot of view and passes a lot of light and heat. A 1 percent mesh cuts glare hard and turns your lake view into a suggestion. No setting does both. The second disclosure matters more: solar shades give you no privacy after dark at any openness, because the light balance reverses the moment your lamps come on. And on fading, NFRC attributes 40 to 60 percent of the damage to UV, so a solar mesh slows what the sun does to a floor rather than stopping it.

When to Call

Signs You Need Solar Shades

If you notice any of these in your Mooresville home, it is worth booking a measure. None of it is urgent, and none of it fixes itself either.

A west room is unusable from three o'clock on

Patio glass throws light across the whole room

You squint through a video call at two o'clock

A tall two-story window has never had anything on it

You keep closing blinds and losing the view

Furniture gets moved around to dodge the sun

Afternoon glare washes out the television

You want the view kept and the glare gone

A sunroom is bright to the point of squinting

Sheer curtains do nothing about direct sun

Our Process

How Mooresville Window Treatments Handles Solar Shades

Every job follows the same five-step process. Transparent, thorough, and done right the first time.

1

Three widths and three heights

2

Heat expectations set honestly

3

Custom fabrication, two to five weeks

4

Cassette or side channels decided

5

Whole elevation ordered together

Real Project Photos

Solar Shades in Mooresville

Photographs from real solar shades jobs completed by our crew in Mooresville and surrounding areas.

Custom shades measured and installed in Mooresville
Scope of Work

What Solar Shades Includes

Every Mooresville job is documented item by item. Here is what the crew covers.

Every elevation walked and written down, because a west window and a north window don't get the same openness

Openness factor chosen per opening, 1, 3, 5 or 10 percent, rather than picked once for a whole house

Samples held against the actual glare at the hour that room is actually a problem

Fabric color decided alongside openness, since dark yarns read the view and light yarns bounce more light back at you

The view you'd be giving up shown to you through a real sample before the order, not described in words

Night behavior explained plainly, because with interior lights on the shade works in the other direction

Heat expectations set honestly, including what an interior product can't do once sun is already through the glass

Fade language kept accurate, since NFRC puts UV at roughly 40 to 60 percent of fading damage

Three widths and three heights per opening plus a corner-to-corner square check

Mounting depth measured for the tube, the brackets and a cassette if the roll is being hidden

Roll direction set, with reverse roll used where the fabric needs to stand off the glass

Light gap per side disclosed, and flagged as larger on shades over 120 inches or past a 4:1 ratio

Wide sun-facing spans reviewed for coupling so two tubes track together across one opening

Chain side chosen per window, with cordless and motorized offered where a chain doesn't suit

Every continuous cord loop unit gets its tensioner anchored rather than left hanging as a loop

Layering discussed where one fabric can't handle daytime glare and nighttime privacy at the same window

Hembar matched to the fabric so an open weave hangs straight instead of waving at the bottom

Each shade run full travel on install day and checked for centered tracking before sign-off

Pricing

What Solar Shades Cost in Mooresville

National category figures put stock shades near $60 to $600 a window and custom-fabricated shades roughly $250 to $2,600. Those are published national ranges rather than a quote for a house in Mooresville. Solar shades sit in the middle of that band and the openness number itself barely moves the price. What moves it is the weave and the yarn: a basic vinyl-coated polyester screen costs less than a fine-yarn or a metalized-backed fabric, and width drives everything as usual. Hiding the roll in a cassette adds. Motorization is priced separately, nationally $300 to $1,500 per window installed. Mooresville Window Treatments works from measured openings and real elevations in Morgan County, never from an average.

By Product

How Solar Shades Differ by Product

Every product in this trade behaves differently in a room. Here is what that means for this work.

1 percent openness: The tightest weave we normally hang. It cuts the most glare and gives up the most view, so the outside reads as a soft haze rather than a scene. Specify it on hard west glass where the afternoon is genuinely unusable.

3 percent openness: Strong glare control with some view left. It's the choice for a home office facing west or south where screens have to be readable through the afternoon, and it's the one people are usually happiest with on the worst window in the house.

5 percent openness: The everyday middle. It keeps a usable view of a yard or a street while taking the hard edge off direct sun. This is the default we start from on most openings before a specific elevation argues us up or down.

10 percent openness: The most open weave, which means the best view out and the least glare control. It suits a north or east window where you want the fabric mostly for daytime privacy and some sun softening rather than for fighting an afternoon.

Dark fabric colors: Charcoal and bronze absorb light rather than scattering it, so the weave holes read as small clear windows and the view through is noticeably better. The tradeoff is that a dark fabric holds more heat at the glass line.

Light fabric colors: White and beige reflect more solar energy back out and keep the fabric cooler, but they scatter light across the weave, which washes out the view and can produce its own soft glare. It's a real choice, not a color preference.

Reverse roll on solar fabric: Rolling the fabric off the front of the tube stands the screen off the glass by an inch or so, which keeps it clear of hardware and lets a little air move in the space behind it. Useful on hot southern exposures.

Cassette headbox: A closed box hiding the tube, which matters more on solar than on other fabrics because an open roll of screen fabric looks like exactly what it is. It also keeps dust out of the weave sitting on top of the roll.

Motorized with a sun sensor: A motor plus a sensor that lowers the shade when the sun actually hits that elevation, or an astronomical timer that runs to sunrise and sunset. It's the version of this product that works when you aren't home to run it.

Layered with a room darkening shade: A second tube on a dual bracket carrying an opaque fabric behind or in front of the screen. The solar shade handles the afternoon, the second shade handles the night, and neither one gets asked to do a job it can't.

Light Control

See What Each Fabric Does To The Light

Pick a fabric below and the window updates. It's a drawing rather than a photograph, so read it as a rough guide to what each family does in a Mooresville room, and to what it doesn't do.

Fabric type

Sheer, 10 percent openness

Ten percent of the weave is open, so you keep the view and most of the daylight. Glare drops a little. After dark, once your lamps are on, someone outside can read shapes through it, which is why this belongs on a view window rather than a bedroom.

Openness factor is printed on the fabric card, so you can compare one line against another before you order anything.

Keeps the viewNot private after dark

Solar, 5 percent openness

The usual pick for a west window or a covered porch. You can still read the yard through it, glare comes down noticeably, and the fabric intercepts a good share of the sun before it reaches you at four in the afternoon.

It also cuts the UV landing on floors and furniture. NFRC puts UV at roughly 40 to 60 percent of fading damage, so this slows fading rather than stopping it.

View and glare controlSlows fading

Solar, 3 percent openness

A tighter weave. The room goes dimmer and the view drops back to an outline. Choose it where the sun is the problem and the view is second, which around here usually means a west wall in July. That's a common call on this side of Indianapolis.

Openness affects how much you see out, not how private you are. A 3 percent fabric still shows silhouettes at night.

View becomes an outlineStrong glare control

Solar, 1 percent openness

Close to a solid fabric with a little view left in it. This is the strongest glare control in the solar family.

The trade is that it darkens the room on a gray January day too. Indianapolis averages a January high near 36F and the light is flat, so think about how the room reads in both seasons before you commit.

Darkest solar optionDim on gray days

Light filtering

No view through it. Daylight comes through the face diffused, so the room stays bright without a hot spot across the television or the kitchen island. This is the default for living spaces.

It isn't private in reverse at night. With the lamps on and the sun down, silhouettes still show.

No view through itBright without the glare

Room darkening

A denser fabric, usually with a liner behind it. Most of the light coming through the face is gone.

Light still arrives around the edges on an inside mount, so a room darkening shade gives you a dim room rather than a dark one. If someone in the house sleeps during the day, say so at the measure and we'll scope it differently.

Dim, not darkEdges stay bright

Blackout

The fabric itself passes essentially no light. What you'll still see is the perimeter. Lutron publishes an inside-mount light gap of about 3/4 inch per side on its Roller 20 and 64 shades, along with a standard factory deduction of 1/16 inch per side, and shades over 120 inches tall or past a 4:1 height-to-width ratio get larger gaps than that.

So if you need a genuinely dark bedroom, that gap has to be dealt with on purpose, either with side channels or by going outside mount. We tell you which one your opening can carry while we're still standing in the room.

Dark facePerimeter needs a plan

Openness factor is a measured fabric spec, so you can compare it line to line. The category names are not measured. One maker's room darkening can behave like another maker's light filtering, which is why the sample books come to the measure and get opened in the room they're going in, at the hour that room has the problem.

Common Questions

Solar Shades FAQ

Questions we hear most often from Mooresville homeowners considering solar shades.

Start at 3 percent and be ready to argue for 5. A west elevation on an open Brookmoor parcel, with acreage running anywhere from 8.4 to 134 acres and no neighbor to break the light, takes the full afternoon load unfiltered. Three percent cuts glare hard while keeping enough view to justify the window. Five percent keeps more of the view and hands back some of the glare, which is fine in a kitchen you pass through and wrong in the room where you watch television. We hang samples in the actual opening at the hour that bothers you before anybody orders anything.
Dark for view, light for brightness, and most Mooresville rooms want dark. A charcoal or bronze mesh absorbs light instead of scattering it, so you see through it clearly and the outside stays legible. A white or beige mesh bounces light back into the room, which softens the sense of glare but washes out whatever you were looking at. On a lakefront elevation at Painted Hills, where light comes up off the water as well as down from the sky, dark almost always wins. The tradeoff is that dark mesh reads as a dark rectangle from the street and light mesh doesn't.
They slow it. They don't stop it, and nobody honest will say otherwise. NFRC attributes 40 to 60 percent of fading damage to UV, which means the rest comes from visible light and heat that a mesh still passes. A 1 percent mesh cuts far more than a 10 percent does, but the tighter weave also cuts the view that made you want the window. In a house on open Morgan County ground where sun reaches a floor for eight hours a day, expect a solar shade to buy you years rather than permanence. Rotating a rug matters about as much as the shade does.
You can't see out well, and yes, people can see in. That reversal catches almost everybody out. During the day the light outside is stronger, so the mesh behaves as though it were one way. After dark your lamps make the room the brighter side, and from outside a solar shade shows the room rather than hiding it. On the lake communities that's often acceptable, since nobody is standing on the water at 10pm. On an in town Mooresville lot with 10 to 16 openings, plan a second layer on whichever rooms you use in the evening.
Well, and it's one of the better uses for the product in this town. That picture window is the largest single piece of glass in a Mooresville ranch, and it's why those living rooms run hot from about 3pm onward. A solar mesh cuts the glare without turning the room into a cave, which is what a room darkening fabric does on the same opening. Width is the constraint. Past about eight feet we split into two shades so the tube doesn't deflect, and we set both on one bracket line so the seam looks deliberate.
Exterior wins on heat, interior wins on nearly everything else. An exterior mesh stops the sun before it reaches the glass, so the energy never enters the room, and on a west elevation that is a difference you can feel. Interior shades intercept the energy after it's already inside. What exterior costs you is weather exposure and a motor that lives outdoors, plus a mounting problem on a 1960s Mooresville ranch where there may be nothing solid to anchor into above the opening. Most houses here end up with interior mesh, and the porches and patios get exterior.
It's the percentage of the fabric that's open space between the yarns. A 5 percent fabric is 95 percent solid and 5 percent holes. That single number sets the whole tradeoff you're buying, because the holes are what let you see out and the solid part is what cuts the glare. Lower openness means more glare control and less view. Higher openness means more view and less glare control. There's no fabric that gives you both, and anybody who tells you otherwise is selling rather than measuring.
Usually lower than people expect. A west elevation in Mooresville takes direct low sun through the worst part of a summer afternoon, and a 10 percent fabric there will not cut it. We'd normally be at 3 percent, sometimes 1 percent if the room is a home office where screens have to stay readable. Understand what that costs you: at 3 percent the view out is real but muted, and at 1 percent the outside becomes a soft haze rather than a scene.
Darker, by a clear margin, and it surprises people. A charcoal or bronze yarn absorbs light instead of scattering it, so each opening in the weave behaves like a small clear window and the view through stays crisp. A white or beige fabric scatters light across the weave and washes the view out, sometimes producing a soft glare of its own. The counterweight is heat: a light fabric reflects more solar energy back out through the glass, while a dark fabric holds more at the window.
Yes, and this is the disclosure that saves arguments later. A solar shade works by having more light on one side than the other. During the day it's brighter outside, so you see out and nobody sees in. After dark with your lamps on, that reverses exactly: you see your own reflection and somebody on the sidewalk sees into the room. It's physics, not a fabric flaw. If a room needs nighttime privacy, you need a second fabric on a dual bracket.
They help at the window and they do far less than the marketing suggests. Here's the honest mechanism: by the time an interior shade is doing anything, the sun's energy has already come through the glass and turned into heat inside the room. A screen fabric absorbs and re-radiates some of that, and a light-colored fabric reflects a share back out, so you feel a real difference standing near that window. An exterior product intercepts sun before it gets in, which is a fundamentally better position. That's the difference.
It slows it. NFRC attributes roughly 40 to 60 percent of fading damage to ultraviolet light, with the rest coming from visible light and heat, so no interior fabric ends the problem. Solar screens block a substantial share of UV and cut visible light too, so a hardwood floor or a leather chair in front of south glass ages noticeably slower behind one. What we won't tell you is that a solar shade protects anything completely, because it doesn't, and the fabric only works while it's down.
Reasonably, and it depends on the openness. At 1 or 3 percent, someone standing outside in daylight sees a screen rather than a room, and that's genuine daytime privacy. At 10 percent, a person close to the glass can make out shapes and movement inside. So openness is doing double duty here: it's your glare setting and your daytime privacy setting at once. What it never provides is privacy after dark once the lights are on inside.
Because you'd be paying for a view you then throw away. The whole reason to buy a solar shade instead of a room darkening roller is that you want to keep looking outside while the glare goes away. At 1 percent the outside is a haze, which is right on a brutal west window and wrong on a north window where there was never much glare to fight. Buying openness room by room is how this product earns its price, and it's why we walk elevations before quoting.
Mechanically nothing. A solar shade is a roller shade, same tube, same brackets, same clutch or motor. The difference is entirely the fabric: an open-weave screen designed around a published openness percentage instead of a fabric designed around opacity and appearance. So the decision tree is different. On a roller you're choosing how much light to block. On a solar shade you're choosing how much view to keep while cutting glare, which is a genuinely different question.
They do, and a slider is often the best case for one, since patio glass throws afternoon light across an entire room and you don't want to lose the view of the yard. The things to plan are width and clearance. A wide opening may want two coupled tubes running on one line so they track together, and the hembar has to clear the door handle and the track at the bottom. Reverse roll helps where the fabric would otherwise foul hardware in the opening.
Usually, and the fix is about angle as much as fabric. Screen glare comes from a bright source reflecting off the display, so what matters is cutting the intensity of the light behind and beside you. A 3 percent fabric on the offending window normally does it, and 1 percent handles the worst west exposures. Where it doesn't work is when the sun is low enough to come in under the hembar, which is why we sometimes extend an outside mount lower rather than going tighter on the weave.
Yes, on a dual bracket, and it's the honest answer rather than a way to sell two shades. One bracket carries two tubes at the same opening. The screen handles the afternoon while keeping your view, and an opaque fabric drops at night for real privacy or for sleeping. Trying to get both from a single fabric always disappoints in one direction. The pair needs mounting depth, so we measure for it at the start instead of adding a second shade later.
On a bank of sun-facing windows, it's the version that actually gets used. A sun sensor lowers the shade when that elevation takes sun rather than when you remember, and an astronomical timer runs to sunrise and sunset through the year. Installed motorization sits nationally at $300 to $1,500 per window. Budget for batteries as an ongoing item: Hunter Douglas states PowerView battery life is about one year, and that's the cost people are least often told about before they sign.
Better than most fabrics, since these are engineered for exactly that. Vinyl-coated polyester screens are the workhorse and they hold color and tension for years on a hard exposure. What ages first is usually the edge that sits exposed on the outside of the roll rather than the body of the fabric, and very fine yarn fabrics are less forgiving than coarser ones. Keeping the shade down through the hottest hours protects the room, which is the whole point of owning it.
Areas We Serve

Solar Shades Across Mooresville

We measure and install in every one of these Mooresville neighborhoods. Each has its own page with the build eras, window conditions and mounting notes for that section.

Related Services

Other Window Treatment Services in Mooresville

Mooresville Window Treatments handles the full scope of window treatment work. Explore our other services below.

Faux Wood Blinds in Mooresville

The slat that ignores a Morgan County August

Learn more →

Wood Blinds in Mooresville

Basswood where the casing earns it

Learn more →

Vertical Blinds in Mooresville

The wide door answer that still works

Learn more →
Free In-Home Measure

Schedule Your Free In-Home Measure in Mooresville

Contact Information

Reach Us Directly

Our team prioritizes scheduled measures and service calls, and books in-home measures during business hours.

Office
1417 Commerce Avenue, Indianapolis, IN 46201
Hours
Mon-Fri 8a-6p
Service Area
Mooresville, IN and Surrounding Areas

Ready to Book Your Measure?

Call us to set up an in-home measure, or to ask about a treatment that has stopped working. We will talk it through on the phone first.

Call (317) 999-5154
Service area

Serving Mooresville and the surrounding area

Call NowGet Quote